Research Report on Analog Panel Voltmeter (Model: imfOO TP-80K)

Abstract

1. Introduction

2. Instrument Design and Specifications

2.1 Physical and Dial Design

• Form Factor: Square panel-mounted design (standard for distribution cabinet integration), with a black plastic casing and a white dial face for high contrast readability.
• Measurement Range: 0–100V, clearly marked with major scale divisions at 20V intervals and minor subdivisions for precise reading.
• Display Element: Red pointer for clear visibility against the white background, aligned with the scale to indicate measured voltage.

2.2 Technical Parameters

2.3 Safety and Compliance

• The "CAT III 300V" rating indicates suitability for use in fixed installations (e.g., distribution cabinets) where transient overvoltages up to 300V may occur, ensuring compliance with industrial electrical safety standards.
• The accuracy class of 2.5 signifies a maximum measurement error of ±2.5V across the 0–100V full scale, aligning with general industrial monitoring requirements.

3. Operating Principle

1. A current proportional to the measured voltage flows through a coil suspended in a magnetic field.
2. The interaction between the coil current and magnetic field generates a torque, causing the coil and attached pointer to rotate.
3. The rotation angle is proportional to the input voltage, with the pointer stopping at a position corresponding to the measured value on the calibrated scale.
4. A restoring spring provides counter-torque to return the pointer to zero when no voltage is applied.

4. Performance Evaluation

4.1 Accuracy and Readability

• The 2.5 accuracy class is suitable for general industrial monitoring (e.g., low-voltage distribution panels), where high precision is not required but reliable trend observation is essential.
• The dial’s fine scale divisions (1V increments between major 20V marks) enable reasonable resolution for detecting small voltage fluctuations.
• The red pointer and high-contrast dial design enhance readability in typical cabinet lighting conditions.

Quick link

Home About Us Products Cases News Contact Us

Quick Contact

Address

East 3rd. Floor, Building A,No.58, Zone B, Yangming Community Economic Park, Liangxi District,Wuxi,Jiangsu,China.

Tel

86-0510-83130350

E-mail

emilyxiong@imhoo.cn

Our Newsletter

Subscribe to our newsletter for discounts and more.

contact us

Privacy Policy |  Sitemap  | China Good Quality Panel Meter Supplier. Copyright © 2026 Wuxi Imhoo Technology Co., Ltd. . All Rights Reserved.